FAQ
What parts should be checked before using a pocket knife?
Before using a pocket knife, check whether the locking structure is intact, confirm the blade opens and closes smoothly without jamming or looseness. Check if there are cracks or notches on the blade surface and if the handle is firmly attached. Also clear debris from blade gaps before operation. Ensure the lock is fully engaged before use to reduce accidental opening risks. Do not continue using the product if the locking component malfunctions.
How to store and maintain a fixed blade knife?
Wipe the fixed blade knife after use to remove water stains and dirt. Store it in the matching sheath only after fully drying. Apply a thin layer of maintenance oil on the blade for long-term storage to slow oxidation. Keep the storage environment dry and ventilated, away from humid areas. Pay attention to blade direction during storage to avoid edge damage from collision. Do not soak the knife in water for a long time or place it in acidic or alkaline surroundings. Inspect the blade regularly for daily maintenance.
How to deal with stiff operation of multi-tools?
When multi-tools open and close stiffly, first clean dust and debris inside hinge gaps. After cleaning, add a small amount of special maintenance oil to the pivot and open/close repeatedly. Do not force the components to prevent structural deformation. Stop using the product if stiffness is caused by deformed parts. Clean gap debris after daily use to reduce poor movement caused by accumulated foreign objects.
Can kitchen knives and scissors be cleaned in a dishwasher?
It is not recommended to clean kitchen knives and scissors in dishwashers. High-temperature water flow and detergent inside dishwashers will accelerate steel oxidation. Blade edges may hit other tableware and form notches. Hand wash with warm water and neutral detergent, then dry immediately after cleaning. Clean food residues at the scissors pivot carefully and store on knife racks after drying to extend service life.
How to handle minor rust spots on knives?
For minor rust spots on knife surfaces, wipe gently with a soft cloth and mild rust remover. Rinse with clean water after wiping and dry thoroughly. Apply a thin layer of maintenance oil afterwards for protection. This method cannot fully remove rust that has penetrated into steel. Avoid hard steel wool scrubbing during cleaning, which may scratch the blade surface and worsen rust. Keep dry in daily use to prevent rust recurrence.
What should be noted when sharpening dull kitchen knife blades by yourself?
Select sharpening tools matching the knife steel. Keep a stable angle and grind at constant speed. Add water continuously during sharpening for cooling to avoid high-temperature tempering that affects blade performance. Do not over-grind one single side. Remove burrs after sharpening and test cutting performance. Protect hands and keep away from blade edges during sharpening. You may turn to professionals if you lack sharpening experience.
What causes loose knife handles?
Loose handles are usually caused by long-term vibration, temperature change or worn fasteners. Stop using the knife once the handle becomes loose and inspect rivets or screws. For screw-fixed handles, tighten appropriately. Loose rivet structures normally require professional repair. Do not use knives with loose handles under heavy load, to avoid handle detachment and safety risks.
Can multi-tools be taken on airplanes?
Air carriage rules are set by local civil aviation authorities and standards vary by region. Multi-tools with blades are generally not allowed in carry-on luggage and mostly need checked baggage. Check the latest civil aviation rules of your destination or consult airport staff before travel. Do not bring bladed tools directly to the airport to avoid detention.
Can maintenance oil for knives of different materials be used interchangeably?
Interchanging maintenance oil is not recommended. Steel types and surface coatings require different oil formulas. Some oils may corrode special coatings. Use dedicated knife maintenance oil and apply a thin layer following instructions. Test a small inconspicuous area on the blade before full application to confirm no adverse reaction.
Are minor scratches on knife edges after receipt considered quality defects?
Distinguish different cases for minor edge scratches. Deep notches or chipping found after unboxing are abnormal. Fine surface scratches may come from edge grinding and quality inspection processes and are not product defects. Fully inspect goods on unboxing. Contact customer service promptly and provide clear photos if obvious damage or deformation exists.